StudioLive-AR16 is our main source of audio interfacing in the sound studio.
The first step to get your audio recorded is you have to turn on the mixing board with the small power switch on the back of the board.
The next step for recording audio would be to log into the computer and load up your chosen DAW (Digital Audio Workstation).
After you are all set up on the computer you need to choose what input you want to you use and make sure the turn on phantom power if you are using a microphone.
After that all the is left is to set your EQ and to set your volumes. To Set your EQ it is best to do it by ear or to try and get a good all around balance so it can be edited in your DAW later.
For an overview of the entire board and how to use it visit https://www.presonus.com/products/StudioLive-AR16-USB
or you can watch